Here, we report on an electrochemical impedance study of silica of organic origin as an active electrode material. The electrode material obtained from carbonized marine biomass containing nanoporous diatoms has been characterised by means of XRD, IR, SEM and EIS. Different kinds of crystallographic phases of silica as a result of thermal treatment have been found. The electrode is electrochemically stable during subsequent cyclic voltammetry measurements taken in the potential range from 0.005 up to 3.0 V vs. Li/Li+. The material has been found to exhibit high charge capacitance of 521 mAh g−1 being cycled at a rate C/20 with capacity retention of about 97%. Electrochemical impedance spectroscopy performed at an equilibrated potential E = 0.1 V in the temperature range 288–294 K discloses low charge transfer resistivity and low diffusional impedance.
The reliability of measurement results is essential for forming a common database of a laboratory network, because a well-maintained and consistent database is the crucial point of countrywide monitoring. Reference materials are important tools in realizing some aspects of quality assurance; they are especially useful in harmonizing work within the network. Among usual types of reference materials in radio analytics solutions, matrix reference materials and some special reference objects are used. All classes of reference materials should be used depending on the purpose of the demonstration of quality, even in-house reference materials. Interlaboratory measurement comparison and performance evaluation programs play important quality assurance role in radio analytical laboratories. Fortunately, nowadays, the main task is to determine a very low radioactivity concentration in the environment; therefore, pre-concentration is necessary. Generally, the radionuclide bearing natural materials collected from sites where there had been sufficient time for natural processes to redistribute various chemically different species of radionuclides are more reliable reference materials than spiked materials—the main difference is the chemical bounding which is crucial from the point of view of the bioavailability. The need of reference material is summarized according to the intended use, like quality control, measurement validation, and instrument calibration. 相似文献
Van der Waals equation of state as well as power laws and critical exponent theories are prototypes to study the cubic shape, asymmetries and “flatness” of the vapor–liquid equilibrium curves near the critical point. In this work we study two similar methods to determine the phase curves in analytical form, which differ from each other by simplicity of mathematical calculation. We analyze temperature dependence of the coexistence curves asymptotically close to the vapor–liquid critical point. We explain the novelty of our method with respect to the standard thermodynamic limit discussed in the literature. Therefore we show that the shape of the coexistence curves can strongly influence the accepted value of the critical exponent. The results of theoretical studies have been compared with the ones obtained by experimental methods. 相似文献
Trichothecene mycotoxins are sesquiterpenoid compounds primarily produced by fungi in taxonomical genera such as Fusarium, Myrothecium, Stachybotrys, Trichothecium, and others, under specific climatic conditions on a worldwide basis. Fusarium mold is a major plant pathogen and produces a number of trichothecene mycotoxins including deoxynivalenol (or vomitoxin), nivalenol, diacetoxyscirpenol, and T-2 toxin, HT-2 toxin. Monogastrics are sensitive to vomitoxin, while poultry and ruminants appear to be less sensitive to some trichothecenes through microbial metabolism of trichothecenes in the gastrointestinal tract. Trichothecene mycotoxins occur worldwide however both total concentrations and the particular mix of toxins present vary with environmental conditions. Proper agricultural practices such as avoiding late harvests, removing overwintered stubble from fields, and avoiding a corn/wheat rotation that favors Fusarium growth in residue can reduce trichothecene contamination of grains. Due to the vague nature of toxic effects attributed to low concentrations of trichothecenes, a solid link between low level exposure and a specific trichothecene is difficult to establish. Multiple factors, such as nutrition, management, and environmental conditions impact animal health and need to be evaluated with the knowledge of the mycotoxin and concentrations known to cause adverse health effects. Future research evaluating the impact of low-level exposure on livestock may clarify the potential impact on immunity. Trichothecenes are rapidly excreted from animals, and residues in edible tissues, milk, or eggs are likely negligible. In chronic exposures to trichothecenes, once the contaminated feed is removed and exposure stopped, animals generally have an excellent prognosis for recovery. This review shows the occurrence of trichothecenes in food and feed in 2011–2020 and their toxic effects and provides a summary of the discussions on the potential public health concerns specifically related to trichothecenes residues in foods associated with the exposure of farm animals to mycotoxin-contaminated feeds and impact to human health. Moreover, the article discusses the methods of their detection. 相似文献
The new DP AdSV method for high sensitive Fe(III) determination in the presence of Solochrome Violet RS was developed. The use of an innovative renewable amalgam film electrode Hg(Ag)FE allowed to obtain high sensitivity and significantly minimize the mercury consumption. The best results were obtained for surface area of Hg(Ag)FE equal to 11.8 mm2. Instrumental parameters were optimized. The optimal results were obtained using differential pulse technique for the following values: sampling and waiting time ts=tw=10 ms, step potential Es=5 mV, pulse amplitude ΔE=50 mV. Measurements were conducted in 0.05 M acetate buffer (pH 5.6), the concentration of SVRS was equal to 5 μM. Deposition step was carried out at the potential ?400 mV for 20 s. Calculated detection limit for 40 s preconcentration time was equal to 1.4 nM (78 ng L?1). The influence of the common in environment, organic and inorganic interferences was studied. The developed method for Fe(III) determination was successfully applied and validated by investigation of certified reference material SPS‐SW2 Batch 118 and recovery of Fe(III) from various spiked samples as snow, tap water and bottom sediments. The repeatability (for 50 nM of Fe(III)) of the developed method expressed as CV was equal 3.1 % (n=5). 相似文献
The first attempts to use ethynylsiloxysilsesquioxanes as reagents for hydrosilylation in the presence of Pt‐ and Ru‐based catalysts are reported. The results obtained strongly depend on the catalytic system used. The catalysts are proved to promote regioselective introduction of β‐(E)‐ and α‐fragments of the alkenylsilane group to the silsesquioxane core. The favourable features of these catalytic systems are their high selectivity and the requirement for relatively mild conditions. This methodology was also successfully applied to dihydro‐substituted organosilicon compounds to obtain a new class of silsesquioxane‐based compounds. 相似文献
In the paper we formulate a criterion for the nonsingularity of a bilinear form on a direct sum of finitely many invertible ideals of a domain. We classify these forms up to isometry and, in the case of a Dedekind domain, up to similarity. 相似文献
Structure and characterization of the sulfur-containing monomers bis[4(2-hydroxy-3-methacryloyloxypropoxy)phenyl]sulfide (S·DM), bis[4(2-hydroxy-3-methacryloyloxypropoxy)phenyl]sulfinyl (SO·DM), bis[4(2-hydroxy-3-methacryloyloxypropoxy)phenyl]sulfonyl (SO2·DM), and their photopolymerization with N-vinyl-2-pyrrolidone (NVP) are presented. The monomers were obtained in the reaction of derivatives of aromatic diols with 2-(chloromethyl)oxirane in the two-phase liquid/liquid system, including organic and aqueous phases. Next, esterification of the obtained diglycidyl ether was carried out with the use of methacrylic acid. Photopolymerization of the compositions (S·DM, SO·DM, SO2·DM and NVP) and the initiator (Irgacure 651) was carried out. The influence of oxidation number of sulfur on the properties of the obtained copolymers was studied. The following properties were determined: density, glass transition temperature, Young’s modulus, hardness and tensile strength. Additionally, dynamic-mechanical and thermal properties were investigated. Thermal properties of copolymers under different conditions (in air, in nitrogen and in helium) were tested. 相似文献